Cancel
Borrow / reserve:
Sander, Electric Random Orbital
Fee: £ 4.00 per week
On loan
Condition: A - As new
Brand: Trend
Code: SSA-0090
Details
Trend T18S/ROS125B 18V 125mm Random Orbital Sander
Trend High Performance Motor - Built for power and endurance
6000 - 12000 Orbits Per Minute - For controlled sanding on a range of materials
Eccentric Orbit Pattern - For fast stock removal and diffused surface finish
2mm Orbit - Small orbit for finer finish
122mm EVA Hook and Loop Base - Fast swapping between grits
Dust Sealed Switch - Prevent dust ingress to ensure consistent performance
8 Hole Extraction Base - Fits the full range of 125mm diameter Trend Abrasives
Dust Extraction Port - For maximum dust capture
Rubber Overmoulds - Minimises vibration for enhanced comfort.
SAFETY INFORMATION & PPE
Safety glasses – Essential
Dust mask – Essential
Ear protection – Recommended
Safety glasses, ear protection, and other PPE are available for a suggested donation at check out.
YOU MAY ALSO NEED
Consumables – Sanding discs – Essential. You can choose between a wide range of grit numbers for sanding discs, depending on the material you have to sand and the kind of work you have to do. The higher the grit number, the finer the sanding paper and the finer the end result will be. As a guide, 60 grit sandpaper is very coarse and 180 is quite fine for woodwork. We can’t guarantee which kind of sanding discs (if any) will be on this sander. We have a small selection that you can borrow, but you may need to buy your own from B+Q, Screwfix etc.
Clamps – Useful to hold your work securely in place and prevent it from moving.
HOW TO USE IT
Determine what finish is required and what grit of sandpaper(s) will be required for the job. Start with the roughest grit of paper & move between each grit as the job progresses.
Prepare the surface by removing protruding nails, screws, broken wood or anything likely to tear the sandpaper.
Maintaining a firm grip on the handle, especially when turning on.
Log in to borrow or reserve
Trend T18S/ROS125B 18V 125mm Random Orbital Sander
Trend High Performance Motor - Built for power and endurance
6000 - 12000 Orbits Per Minute - For controlled sanding on a range of materials
Eccentric Orbit Pattern - For fast stock removal and diffused surface finish
2mm Orbit - Small orbit for finer finish
122mm EVA Hook and Loop Base - Fast swapping between grits
Dust Sealed Switch - Prevent dust ingress to ensure consistent performance
8 Hole Extraction Base - Fits the full range of 125mm diameter Trend Abrasives
Dust Extraction Port - For maximum dust capture
Rubber Overmoulds - Minimises vibration for enhanced comfort.
SAFETY INFORMATION & PPE
Safety glasses – Essential
Dust mask – Essential
Ear protection – Recommended
Safety glasses, ear protection, and other PPE are available for a suggested donation at check out.
YOU MAY ALSO NEED
Consumables – Sanding discs – Essential. You can choose between a wide range of grit numbers for sanding discs, depending on the material you have to sand and the kind of work you have to do. The higher the grit number, the finer the sanding paper and the finer the end result will be. As a guide, 60 grit sandpaper is very coarse and 180 is quite fine for woodwork. We can’t guarantee which kind of sanding discs (if any) will be on this sander. We have a small selection that you can borrow, but you may need to buy your own from B+Q, Screwfix etc.
Clamps – Useful to hold your work securely in place and prevent it from moving.
HOW TO USE IT
Determine what finish is required and what grit of sandpaper(s) will be required for the job. Start with the roughest grit of paper & move between each grit as the job progresses.
Prepare the surface by removing protruding nails, screws, broken wood or anything likely to tear the sandpaper.
Maintaining a firm grip on the handle, especially when turning on.